We offer a scope of FIRE HYDRANT SYSTEM and YARD HYDRANTS with all required frill. A portion of the component of this frameworks are as per the following -
HYDRANT SYSTEM
The Hydrant System involves AC engine driven direct sets with all required embellishments including valves, instrumentation and controls and so forth. Finish in all regards. A programmed hydrant framework is outfitted covering the territories totally from autonomous.
• Pipe work from the fire water pump set.
• The hydrant pipe work is remaining pressurized through the proposed maneuver draw dealing with any spillages in the framework pipe lines, valves and fittings.
The hydrant framework is kept charged by pressurized water at approx. 7 Kg. Cm. Sq. constantly. In case of flame when any of the hydrant valves in the system is opened, the resultant fall in weight framework is empowering beginning the AC MOTOR driven fire water pumping set through weight switches consequently. One diesel motor pump should be standby pump serving hydrant framework. Aside from the programmed beginning of the pump sets, arrangement should be kept for manual beginning too. Closing down of the pump sets might be manual.
Meet the best fire hydrant system contractors in Punjab at secured enginers to meet your security needs related to this.
YARD HYDRANTS
• Hydrants inside the building is outfitted with required frill, for example, hose funnels with prompt firearm metal couplings and g.m branch channels situated in hose cupboards. The hose cupboards is divider/segment mounting sort, built out of 18 gage mellow steel sheets.
• The inside hydrants (Landing valves) is single taken sort taken off from 150/100 mm dia riser through reasonable reducer. The outlets is weapon metal and affirm to IS: 5290. HT Hose reels is immovably held against the divider by appropriate substantial sections and backings. The hose reel is swinging sort (180 deg.) and the whole Dum reel and so on is according to Seems to be: 3876. The elastic tubing is best quality (Dunlop) and the spout is 6 mm dia. Close off sort. The gear should be out of one of the endorsed makes.
• The hydrant fundamental is laid through ring principle. The hydrant risers is ended with air discharge valves at the most elevated focuses to discharge the caught air in the pipe work.
Fire Hydrant Pumps
Fire pumps are typically housed in a pump room near the fire tanks. The key thing is that the pumps ought to be situated at a level just underneath the base of the fire tank, with the goal that all the water in the tanks can stream into the pumps by gravity.
Like extremely imperative frameworks, there must be reinforcement draws on the off chance that the principle pump falls flat. There is a principle pump that is electric, a reinforcement pump that is electric, and a moment reinforcement pump that is diesel-controlled, on the off chance that the power fizzles, which is normal. Each of these pumps is equipped for directing the required measure of water exclusively - they are indistinguishable in limit.
There is additionally a fourth sort of pump called a maneuver pump. This is a little draw joined to the framework that persistently changes on to keep up the right weight in the conveyance frameworks, which is typically 7 Kg/cm2 or 100 psi. On the off chance that there is a little spillage some place in the framework, the maneuver pump will change on to adjust for it. Each move pump will likewise have a reinforcement.
Meet the best fire hydrant pumps suppliers in Punjab at Secured Enginers to meet your security needs related to this.
The pumps are controlled by weight sensors. At the point when a fire warrior opens a hydrant, or when a sprinkler goes ahead, water spouts out of the framework and the weight drops. The weight sensors will identify this drop and switch the fire pumps on. Be that as it may, the best way to turn off a fire pump is for a fire warrior to do this physically in the pump room. This is a global code of training that is intended to keep away from the pumps changing off because of any breakdown in the control framework.
The limit of the pumps is chosen by considering various elements, some of which are:
- The zone secured by hydrants/standpipes and sprinklers
- The quantity of hydrants and sprinklers
- The expected range of operation of the sprinklers
- The sort and design of the building